Design and manufacturing according to codes, rules and customer specifications
- Pressure range from 1 to 20 bar for lubrication and up to 250 bar for regulation, seal oil, or hydrojacking
- Flow range until 6 000 L/min
- Power up to 200 kW
- Atex Zone 1, Zone 2 components
- NACE MR01/75 components
- U-STAMP, PED 2014/68/UE certified
- Electric wiring according to european and american rules
- Materials stainless steel (304L, 316L, 321, …), low temperature carbon steel, duplex, inconel, sanicro, titane…
- Tubing with double ferrule fittings
Offshore, onshore and FPSO applications
- Centrifugal compressors
- Reciprocating compressors
- Steam turbines
- Process pumps
Tests on request :
- Performance tests according to API 614 and customer specifications
- Flushing according to API 614
- PMI (Positive Material Identification)
- NDE (Non Destructive Examination)
- Painting pull off test according to ISO 4624
- Tests in 50 / 60 Hz
- Shaft ends alignment with laser guide
- Test run : particle counter
- Noise measurement
- Chart recorder : pressure, temperature
Projects :
Kashagan, Total Akpo, Lukoil, El Gassi, Total Gonfreville, GDF Cerville, Adco Neb, OGD III, AGD II, Sasol, Ras Gas, Aramco-Hawiyah, Ras Laffan, Exxon NDG, Amak, Kirishi, Manmad, Chile, …
Our realizations of lube oil consoles
Lube oil console API 614 : Kirishi project
- Lube oil console according to API 614
- Double oil cooler, accumulator, oil tank and oil demister made in stainless steel by Oeltechnik-France
- Water cooling with turbine
 |
 |
 |
Lube oil console API 614 : Total Gonfreville project
- Lube oil console according to API 614
- Tank with hand rails
- Integration of plate heat exchanger
- 2x6 ways transfer valves tom commute simultaneously water and oil
- Destination : France
 |
 |
Lube oil console : Manjung project
- Flow rate : 2 x 5400 l/min
- Tank capacity : 140 000 l
- Lube oil console for steam turbine 700 MW
Lube oil console : Manmad project
- Lube oil console according to API 610
- Flow rate : 37 l/min
- API vertical submerged pump
- U-STAMP air cooler
- Panel mounted instruments
Lube oil console : Man Turbo Bilborec project
-
Console PED 97/23/CE - ATEX
-
Flow : 410 l/min
-
Full stainless steel
-
Destination : Spain
Lube oil console : Shah gas project
-
13 lube oil consoles API 614
-
Flow range : from 119 to 610 l/min
-
U-Stamp pressure vessels
-
Oil demister made by Oeltechnik
-
Destination : Abu D'habi
Lube oil console : Zadco Kongsberg project
-
Lube oil console for gas turbine (revamping)
-
Flow : 900 l/min
-
API 614
-
Destination : Abu D'habi
Fuel skid : Perenco Batanga project
-
Stainless steel skid
-
Gas flow : 5310 Nm3/h at 18 barg
-
Design pressure : 35 barg
-
Destination : Gabon
 |
 |
-
Lubrication Unit for an LNG Tank in Skikda (Algeria)
As part of the construction of a new Liquefied Natural Gas (LNG) storage tank on the Skikda site, we took part in this major project by providing the lubrication unit, in full compliance with the requirements of the ARH (Hydrocarbons Regulatory Authority).
The lubrication unit, with overall dimensions of 7500 x 2950 x 4692 mm and a total weight of 11.18 tons, was designed according to API 614 – Part 2, which defines the design and performance requirements for lubrication and control systems used with rotating equipment in the oil and gas industry.
This ensures high reliability, operational safety, and ease of maintenance.
